Square Type Cross Flow Cooling Tower
Square cross-flow cooling towers are mechanical equipment used in industrial circulating water systems and are widely applied in numerous circulating systems of enterprises in the petroleum, chemical, metallurgical, pharmaceutical, and power industries. It is suitable for extremely cold regions and effectively solves the problem of freezing of blinds in winter.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Square Type Cross Flow Cooling Tower
CF Series Square cross-flow cooling towers are mechanical equipment used in industrial circulating water systems adopts a design with air intake from both sides. An axial flow fan is installed at the top to drive the air to flow through the packing inside the tower. The hot and humid air is then discharged outside the tower after heat exchange.
The packing material adopts bidirectional point wave plates (with protrusions on both sides) and is bonded into a whole through installation heads, or a PVC honeycomb structure to enhance rigidity and water film formation capacity. Water collection measures are provided at the tail of the packing material.
The main structure includes a hot-dip galvanized steel frame, fiberglass reinforced plastic panels and a fan. According to the on-site conditions and customer requirements, single equipment assembly or multiple combined equipment installation can be flexibly selected. It is equipped with a closed-loop circulating water tank and anti-freezing louvers, making it suitable for extremely cold regions has effectively solved the problem of blinds freezing in winter.
Square cross-flow cooling towers are often used in fields such as power, chemical engineering, metallurgy, and pharmaceuticals. This equipment complies with the national standard GB7190.1-2008 and has passed the ISO9001 quality system certification.Square Type Cross Flow Cooling Tower can reduce energy consumption of the supporting units and ensure efficient operation of the whole system. With improved overall design of the cooling system, air duct, water collection device, and water distribution system, products of the series are characterized with stable structure, high heat exchange efficiency, low noise, environmental protection and energy saving, easy maintenance, and long comprehensive service life.
CF series cooling towers are suitable for applications where circulating water is used for heat dissipation, including for the natural cooling of air conditioning, refrigeration or heat storage systems, and for the cooling of water in the condensers of such systems; cooling tower chiller can be used to cool the water in water jacket of engine or air compressor, and are also widely used in industrial and manufacturing processes to dissipate waste heat. In addition to the CF series, Latino also supplies various types of cooling tower, with a wide range of more comprehensive designs and installation capacities to meet the special needs of customers' particular equipment and cooling tower chiller AHU diagram.
Our Advantage
Save space
By adopting high-efficiency heat exchange packing, the heat exchange area has been significantly increased. Due to the optimized structural design and the use of steel structure, the operating weight has also been greatly reduced.
Save electricity
The adoption of packing materials with low ventilation resistance and airfoil FRP fans reduces the motor power. The ultra-low noise motor has a smaller power and saves more electricity. It can also be equipped with a dual-speed motor as needed to save electricity.
Extremely low noise
Low-noise axial flow fans and motors are adopted to reduce the operating noise. If A dual-speed motor is used, the noise can be further reduced by 2-3dB(A) during low-speed operation at night.
Corrosion resistance
The steel structural components of the tower body are treated with galvanization after processing to enhance the corrosion resistance of the cooling tower. During its normal service life, no additional anti-corrosion treatment is required.
Easy to combine
A combination approach can be adopted to meet the site requirements, such as when the site is very limited. It can also be designed according to the requirements to meet the demands for thermal performance and noise.
Easy to maintain
Adopting a modular design, the air chambers of adjacent cooling towers are separated from each other. Under normal operation, maintenance, inspection, cleaning of packing, collecting pipes and water tanks can be carried out more conveniently.
Hot Tags: square type cross flow cooling tower, China square type cross flow cooling tower manufacturers, suppliers, factory
No Information
No Information
