enLanguage
Home / Products / Cooling Tower Parts

Cooling Tower Parts

Cooling tower parts mainly including the follows:

  • Cooling tower fill;
  • Cooling tower drift eliminator;
  • Cooling tower nozzle;
  • FRP casing;
  • FRP profile;
  • Distribution system;
  • Mechanical parts, including fans, motors, drive shaft, gearbox,etc

We offer replacement cooling tower parts for Marley, BAC, Evapco, Hamon, GEA, Kuken, Spindle, Spig, EBARA, Lanxun, Liangchi, Kingsun, Seagull, etc . We manufacture  the cooling tower parts for all kinds of cooling towers.

 

Your Leading Cooling Tower Parts Supplier

 

Tianjin Latino Environmental Technology CO.,Ltd is a scientific-oriented economy body integrating with scientific research, designing, manufacturing, installation and service maintenance, which is originated from European.We, Tianjin Latino are specialized supply one stop service for the cooling tower parts and cooling tower engineer service.

 

Why choose us

Widely used

Tianjin Latino's cooling tower and cooling tower parts is widely used in the Petrochemical, Petroleum, Power, Metallurgy, Medicine and Rubber Industry, etc..

Extensive market

Our business involve in covers 64 countries and regions including the UK, Germany, Italy, Belgium, France, Poland, Israel, Russia, Turkey,UAE,IRAN, Malaysia,Philippines, Indonesia, Korea, Japan, Australia, Thailand, India, Singapore and New Zealand, Netherlands,Ukraine, etc..

Rich experience

We have more than 20 years of production experience in the industry.

 

Rich products

Tianjin Latino's main products are cooling tower, cooling tower Film Fill, cooling tower drift eliminator and cooling tower spray system, UPVC distribution pipes, FPR winding pipe, FRP profile parts,FRP gratings, Fan stack, etc.

 

First 12 Last 1/2
Type of Cooling Tower Parts

 

Cooling tower fill media
One significant part of the cooling tower is the fill material/media. This is also referred to as the wet deck or surface.

Its main function in cooling towers is to expedite the surface area of the cooling tower to allow optimum contact between the air and the water as possible for the longest period.

The fills also make the water produce thin flowing sheets that could expose much water surface area in the contact. This could lead to larger evaporation rates.

 

Cooling tower fan
The types of cooling towers such as counterflow, crossflow and mechanical draft have fans. The main function of these fans is to push and force the air into the cooling tower.

 

Cooling tower drift eliminators
Another essential part of the cooling tower is the cooling tower drift eliminator. This part captures the large water droplets from the air stream of the cooling tower. The water droplets contain chemicals and minerals that are affecting the environment.

Meanwhile, the drift eliminators inhibit the water droplets from getting out in the cooling tower. It alters the direction of the water droplets, which impact the blade walls and return to the cooling water.

 

Cooling tower gear box
Cooling tower gearboxes are needed for the big fans and powerful motors of the cooling tower. They act as reducers, in which they slow the rotational speed from the motor to the fan of a cooling tower.

 

Cooling tower nozzles
The cooling tower float valves are needed to maintain the right water levels inside the cooling tower. They regulate and control the water level, which could contribute to the lifespan of the cooling tower.

These float valves are of little maintenance too. Usually, the complete kit of float valves includes the float arm, the valve, and the float.

The installation of the float valve setting requires trial and error, in which it needs adjustment to balance the makeup water with the tower. Keep in mind that there must be no water wasted in the overflow at the closing down of the pump.

 

Cooling tower piping
Cooling tower piping chief function is to distribute water in the cooling tower. The magnitude and routing of the water piping between the heat source and the location of the tower depending on the kind of tower, site layout, and the topography.

 

Cooling tower motor
The cooling tower motor aims to drive the fans on a type of cooling tower such as the mechanical draft cooling tower. The motors must be efficient and durable to withstand the adverse atmosphere in the tower.

 

Cooling Towers: Materials

 

 

The nature of the water to be cooled significantly affects both the choice of building materials to be used and the most suitable type of filler. In the presence of particularly aggressive or acid water, stainless materials or glass fibre is preferred as it is intrinsically insensitive to most chemical agents.

 

 
Stock

 

productcate-1-1
productcate-1-1
productcate-1-1

 

 
Warranty

 

Warranty

Period

The warranty period for the Product shall be 18 months after the shipment of the Product from the Seller's works or 12 months after the Product comes into operation, whichever comes first.

Warranty

Condition

In the event that any problem or damage to the Product arises during the "Warranty Period" from defects in the Product whenever the Product is properly installed and combined with the Buyer's equipment or machines, maintained as specified in the maintenance manual, and properly operated under the conditions described in the catalog or as otherwise agree upon in writing between the Seller and the Buyer or its customers; the Seller will provide, at its sole discretion, appropriate repair or replacement of the Product without charge, except as stipulated in the "Exception for Warranty" as described below.

However, if the Product is installed or integrated into the Buyer's equipment or machines, the Seller shall not reimburse the cost of: removal or re-installation of the Product or other incidental costs related thereto, any lost opportunity, any profit loss or other incidental or consequential losses or damages incurred by the Buyer or its customers.

Exception

for

Warranty

Not withstanding the above warranty, the warranty as set forth herein shall not apply to any problem or damage to the Product that is caused by:

1. Installation, connection, combination or integration of the Product in or to the other equipment or machine that is rendered by any person or entity other than the Seller;

2. Insufficient maintenance or improper operation by the Buyer or its customers, such that the Product is not maintained in accordance with the maintenance manual provided or designated by the Seller;

3. Improper use or operation of the Product by the Buyer or its customers that is not informed to the Seller, including, without limitation, the Buyer's or its customers' operation of the Product not in conformity with the specifications, or use of lubrication oil in the Product that is not recommended by the Seller;

4. Any problem or damage on any equipment or machine to which the Product is installed, connected or combined or on any specifications particular to the Buyer or its customers;

5. Any changes, modifications, improvements or alterations to the Product or those functions that are rendered on the Product by any person or entity other than the Seller;

6. Any parts in the Product that are supplied or designated by the Buyer or its customers;

7. Earthquake, fire, flood, sea-breeze, gas, thunder, acts of God or any other reasons beyond the control of the Seller;

8. Waste, exhaustion, normal wear and tear, or deterioration of the Product's parts, such as bearings, oil-seals;

9. Any other troubles, problems or damages to the Product that are not attributable to the Seller.

 

 
FAQ

 

Q: What is a cooling tower a major part of?

A: An industrial cooling tower can be larger than an HVAC system and is used to remove the heat absorbed in the circulating cooling water systems used in power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, and other industrial facilities.

Q: What comes out the top of a cooling tower?

A: In fact, what they actually release is water vapour – similar to, but nowhere near as hot, as the steam coming out of your kettle every morning. And this probably isn't the only thing you never knew about cooling towers.

Q: What is at the bottom of a cooling tower?

A: Cooling water basin.
Located at the bottom of the cooling tower, the water basin has two uses: is designed to catch and allow recirculation of the cool water from the cooling process back into the condenser system and, to provide weight and structure for the tower.

Q: What is the all the white stuff coming out of a cooling tower?

A: Cooling towers work by evapourating water, which takes heat with it. Same as boiling water where the steam contains heat. As the temperature of the water vapour cools in the air above the liquid, it condenses into droplets. Looks white like a cloud because is is in fact a small artificial cloud.

Q: What is the temperature inside a cooling tower?

A: The system capacity varies with design temperature as limited by process conditions. The usual cooling range is between 25 and 30°F. The inlet temperature of water to cooling equipment is established by ambient conditions, generally in the range 75–86°F, and the outlet temperature is in the range 104–114°F.

Q: What is the fill inside a cooling tower?

A: The cooling tower fill is a medium used in cooling towers to increase the surface area of the tower. Its primary function is to put as much water surface area in contact with as much air as possible, for as long as possible. This allows for greater evaporation rates.

Q: How often should a cooling tower be cleaned?

A: Twice a year
While some cooling towers require more frequent cleaning due to continual operation throughout the year, OSHA (the Occupational Safety and Health Administration) recommends cooling towers be thoroughly cleaned and disinfected at least twice a year.

Q: Why is my cooling tower foaming so much?

A: Factors Causing Foam
Excessively High Alkalinity Total Dissolved Solids (TDS) of recirculating cooling water is controlled by bleed-off of system water. High TDS can mean excessively high alkalinity levels, which lowers the surface tension of the water and can lead to foaming.

Q: How often should cooling tower fill be replaced?

A: Typically, heat transfer media (otherwise known as fill) will need to be replaced once or twice during the life of a cooling tower. The longevity of fill, or heat transfer media, is predominantly a function of water and air quality, as well as proper operation.

Q: What is the best material for cooling tower fill?

A: Material choice
When your working temperature is below 65 °C, you can choose the PVC cooling tower fills. And it is the most widely used type in the cooling towers. If the working temperature ranges form 65 °C to 90 °C, the PP cooling tower fills is the best choice.

Q: How do you control pH in a cooling tower?

A: Acids like ascorbic acid, hydrochloric acid and sulfuric acid can be used to combat the rise in pH, but they can damage the cooling tower if it contains certain materials. The allowable pH ranges for different cooling towers vary.

As one of the most professional cooling tower parts manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to wholesale custom made cooling tower parts from our factory. Contact us for more cheap products.

cooling tower screens, pvc Spray Nozzles, cooling tower quality control

(0/10)

clearall